Program for calculating geometric properties (moment of inertia, centroid, area, etc.) of any plane figure which can be defined by polygons, circles, rectangles and circular sectors. It is programmed completely in C, using HP-GCC. For the 49g+ and 50g only.
An application for the calculation of continuous beams, it is possible to enter different configurations of loads and supports, as a result it presents the reactions, equations in each of the ranges, the shear diagram, the moment diagram, the angle diagram, the deflection diagram and the maximum and minimum points of each diagram.
Displays the remaining battery power in the 49g+ and 50g, including a display of the current voltage.
Program for calculating the area, center of gravity, moments of inertia and main angle of composite geometric figures.
Steam tables with thermodynamic properties of water and steam calculated from the industrial standard IAPWS-IF97.
(
An application for the calculation of continuous beams, it is possible to enter different configurations of loads and supports, as a result it presents the reactions, equations in each of the ranges, the shear diagram, the moment diagram, the angle diagram, the deflection diagram and the maximum and minimum points of each diagram.